I'm building a predator bike, I've done LOTS of research before starting. I will be running a jackshaft from AGK to drive the rear wheel(unless you can provide me a way/list of parts to make one FOR a lot less that doesn't require welding) This bike original had straight handlebars, I did away with those INSTANTLY...and added my own cruiser bars. I also plan on adding a cruiser seat as well. I will be re rerouting m exhaust so it's under the seat tube, not that it's in the way right now anyway. This huffy has a badge on it that says "HUFFY USA and the american flag above) Everything is STEEL and the welds are BEYOND solid. It's better quality than I've ever seen on a huffy. I cleaned it up after buying it on Craigslist. I mounted it all up and put a new brake cable on and neatly capped the end of the cable. Everything is CLEAN and solid! It really is a beauty. I can't wait to get rid of the ants in my pants building this. I can NOT wait until it is finished! I made MY OWN throttle linkage for the stock carb. I cut a spoke out of an unused VERY shot bicycle wheel. The wheel was black(that's why the linkage is black). So, I cut the spoke out using my angle grinder, bent the ends to the needed shape with some pliers and snapped it all together. EVERYTHING works beyond butter smooth and the throttle response is BEYOND perfect. I plan on only going 35 MAX, this will not be used to HAUL ***, I'm not interested in using it for that purpose. I will be using it to take relaxing cruises with some fellow 2 stroker guys. So anyway that's that. Here are pictures!