What a problem child. I ended up shearing off the front engine mount bolt and snapped off the other taking it apart. Why did I use the supplied bolts again? I successfully drilled and extracted one bolt just fine. The other required a Helix-coil. Then the jet found so debris. I cleaned it out but ended up replacing it with a SHA. Had a spark plug problem too. I tried a NGK PB6HS spark plug for my but the piston keep closing the gap. Squeezing a set of 29's on it was a dumb idea, they fit tho. Then the rear (bike chain) sprocket clip keep popping off, weird. I used a thicker sprocket and new clip, a-o-k, now. Pulled the clutch, fired the beast, dropped the choke and zoom, zoom, clunk, clunk. Opps, forgot to tighten the chain tensioner.
Finally, back on the road again. I have video proof.