Neufcruz
Member
Or go with 2 of these and paint black and get it perfect????
Thoughts
Thanks
Mike
Thoughts
Thanks
Mike
An intake reed valve is designed to block back pressure through the carb, darn handy when using an expansion chamber exhaust as it is pushing fuel back in to the combustion chamber from the exhaust side, otherwise I find them about as useful as a boost bottle, meaning useless.Kc,
This what I was thinking as well. Any suggestions on where to get a different intake for this angle? It would have to attach to the reed valve and then the carb! Correct?
Mike
Or go with 2 of these and paint black and get it perfect????
Thoughts
Thanks
Mike
View attachment 71096
An intake reed valve is designed to block back pressure through the carb, darn handy when using an expansion chamber exhaust as it is pushing fuel back in to the combustion chamber from the exhaust side, otherwise I find them about as useful as a boost bottle, meaning useless.
Gasbike has few different intakes here.
http://www.gasbike.net/scart/public/scart/dynamic.php?uid=3&action=search&searchby1=keywords&searchby_keywords_type=all&searchby_keywords=intake&x=0&y=0&scart_referrer=http://gasbike.net/
Are you running an expansion chamber exhaust?
almost afraid to ask why the mounts built into the frame weren't used
because they're junk that'll crack in either your first 500 miles or first crash, whichever comes first.almost afraid to ask why the mounts built into the frame weren't used
because they're junk that'll crack in either your first 500 miles or first crash, whichever comes first.