Jackshaft Jackshaft chains rubbing

Ooooo u mean the outter sprocket...
When i put on the 7 speed hub i had put red loc tite on 17t (alot) when i put on shaft so i cant move it off without heat and a hammer so i had to flip js sprocket to help line up with 8 tooth...i should have mentioned that
 
Ouch. Well heat will be your friend with any Loctite. Clean it all up, make sure there are no burrs and properly reassemble.
 
I bought myself a jackshaft kit and installed it had no issues it works except the chains on the right hand side rubbing when i shift past 3rd gear and as you could imagine caused some serious s***. I have a new chain but i fear its gunna snap this one to. Did i do something wrong or forget something like these black plastic peices or is this what im stuck with?

Scroll to 6 minutes on the video to solve your chain interference issues.

 
I have found that the SickBikeParts right hand side chain tensioner is absolutely essential for good reliability, and the left hand side chain tensioner significantly reduces primary chain vibration.



 
Back
Top