Jeffrey gagnon
Member
- Local time
- 1:58 AM
- Joined
- Apr 29, 2016
- Messages
- 91
Ok so i fabricated a copper/aluminum head gasket. I have a iridium tip spark plug bpr8hix with a 16 mm Keihin Carburetor Clone with a dual boost bottle kit i already know alot of people think its a waste of money but i can feel the performance from it anyways so after i fabricated my head gasket took for compression reading was about 150 psi is this an ok number for the mods i have? Also grinded off the little part of the piston skirt on the intake side. I also want to add that i also made a spacer out of an aluminium pop can dropped the compression to 130 psi