darwin
Well-Known Member
- Local time
- 4:12 AM
- Joined
- May 26, 2008
- Messages
- 7,999
Interesting exhaust pipe choices
- Thread starter darwin
- Start date
- Status
D
Deleted member 12676
Guest
those are for 4 strokes
bluegoatwoods
Well-Known Member
Nice!
Maybe they are for four strokes. But us two stroke people aren't all that picky. I could be tempted to try it and I wouldn't even care all that much if it didn't work perfectly.
Though I suppose it'd be a waste if the engine/exhaust didn't breathe two stroke style at all.
But then I'd just chalk it up to experience.
Maybe they are for four strokes. But us two stroke people aren't all that picky. I could be tempted to try it and I wouldn't even care all that much if it didn't work perfectly.
Though I suppose it'd be a waste if the engine/exhaust didn't breathe two stroke style at all.
But then I'd just chalk it up to experience.
45u
Active Member
I got this one off eBay. Made just for these motors by a shop in FL and it is made for a 2 cycle. A pipe on a 2 cycle is much more critical on a 2 cycle then a 4 cycle. Many times on a two cycle a good pipe will make a BID difference!!!!!!!!!!!!!!!!!!!
45u
Active Member
Sorry but you have no clue about exhaust pipes on a 2 cycle. why install something that is going to make your motor perform worse????? Do some research and then get back to us.
bluegoatwoods
Well-Known Member
Don't worry about me and what I might or might not know. I've been building these bikes for a long time now and I know that a lot of folks get things done well enough even after the nay-sayers have had their laughs.
Do you really think the stock exhausts, or an aftermarket poo pipe, are properly tuned to these cheap engines?
But that's okay......just go right ahead and s**t on people's suggestions and tell them they don't know squat and see how for it gets ya.
45u
Active Member
I have made my living for the past 45 years working on motorcycles of all types including but not limited to machine work. Putting a rod kit in one of these little motors is not a problem for me. Have you built any? No you are correct the stock and most of the after market pipes are not very good. But why would a person want to make ti worse? I am not s**tting on any one just telling the facts so someone does not waste money on a pipe that might be worse! I thought I was nice about it you are the one turning it around. Run what every pipe you want if I change I will run that is better not worse! Do you make a living working on them? The only reason I ask would you recommend a pipe to a customer that is not any good or worse then what they have?
Last edited:
Frankfort MB's
Well-Known Member
I don't see a reason why not to install a expansion chamber
45u
Active Member
Yes a good one makes a big difference but a poor one could make things worse. This is why I try to get those to buy a good one and not something that could make things worse.
Last edited:
Frankfort MB's
Well-Known Member
I have to say, I don't think anything is as bad as stock exhaust. But there are some people out there that was want something that looks cool or is quiet.
I have the MZMIAMIPARTS expansion chamber and it is not only cool looking but very VERY loud
I have the MZMIAMIPARTS expansion chamber and it is not only cool looking but very VERY loud
- Status
