more power for 48cc engines

[Deleted member 12676]

48cc is just too small as it is. I recommend upgrading to a 55cc engine by replacing the cylinder and piston/rings of the larger size. Below is the link. Just $75.
http://www.simpsonmotorbikes.com/55cc Hop up Kit.html

 

[undercover bluebird]

i have herd of this type of kit but i keep hearing people say different thing on how you gotta cut the gasket and such. what bout this kit is this made for 48cc truly

 

[DanTheDIYGuy]

Yes but you're forgetting the legal requirements on the road. I live in a state where I am required to run at 49cc or lower if I have no license for the bike.

 

[Frankfort MB's]

It will be fine, idk of any cops that would check the bore and stroke of a bicycle engine just to get you for not having license

 

[Deleted member 12676]

No one, but no one, is going to measure the inside of your cylinder. don't be a pansy, f*** the cops, lie to their face like you would lie to the devil.

 

[Frankfort MB's]

No one, but no one, is going to measure the inside of your cylinder. don't be a pansy, f*** the cops, lie to their face like you would lie to the devil.

I've done it before

 

[AutOtaku]

Couldn't you just get a 66/80cc top end/jug-head (whatever the term is for small engines) and put it on the 48cc? I mean if all your doing is increasing the bore and stroke with that of one 11cc's larger than 55 it should work

 

[Frankfort MB's]

The spacing is different on the studs

 

[skyash]

The crank is probably different wait. Conrod spacing lots of stuff. Over here thay say the cops will diyno your bike if the output is more than 200w then $1200 in fines

 

[Deleted member 12676]

where is "over here"?