D
Deleted member 25783
Guest
Here is another thing, Be careful what you want. Do not exceed your capability's unless you have a good machine shop accessible. I own one and a good one at that.
Having performed work in trade for goods with CostomMotoredBicycles.com I was offered a laced free wheel with disc brake threaded mounting holes which was a return. ( Broken Screw ).
Today I made a setup in the Bridgeport, the rim supported by blocks on either side of the mill vise. I had the freewheel sprocket against the mill vise jaw so it would not change position. Setup complete, all six holes redrilled and rethreaded
1/4=28 NF thread which for it's size I think superior to 6mm x 1.
There is more to this story, but I have been up since 3 AM. I'm running out of gas.
Tom from Rubicon
Having performed work in trade for goods with CostomMotoredBicycles.com I was offered a laced free wheel with disc brake threaded mounting holes which was a return. ( Broken Screw ).
Today I made a setup in the Bridgeport, the rim supported by blocks on either side of the mill vise. I had the freewheel sprocket against the mill vise jaw so it would not change position. Setup complete, all six holes redrilled and rethreaded
1/4=28 NF thread which for it's size I think superior to 6mm x 1.
There is more to this story, but I have been up since 3 AM. I'm running out of gas.
Tom from Rubicon