Accidentally forgot to mix oil

[Roughrats]

Hey,

So I forgot my sister was using my gas can for the lawn mower which has no oil mixture and I filled my bike today with it. About 7 miles in it started to lose speed and completely shut off. Is there a way to put oil in now and let it sit? I'm in a rather hilly city and could only push it half way home. Did I completely ruin my baby?!

Any help would be amazing!

Also it's a Puch Sport Maxi

 

[MotorBicycleRacing]

Hey,

So I forgot my sister was using my gas can for the lawn mower which has no oil mixture and I filled my bike today with it. About 7 miles in it started to lose speed and completely shut off. Is there a way to put oil in now and let it sit? I'm in a rather hilly city and could only push it half way home. Did I completely ruin my baby?!

Any help would be amazing!

Also it's a Puch Sport Maxi

You probably siezed your piston in the bore due to no oil.
Adding oil now will do nothing for any damage to the piston, rings and bore.

 

[skyash]

Put oil in the spark plug hole and rock the bike back and fourth it might free up might

 

[crassius]

if it turns after putting some oil in cylinder, you should take off head and look inside

if there is a bit of scuffing on cylinder wall with no deep drag marks, you should smear a lot of oil on walls and roll bike to work piston up & down for a while with head off, then check walls again

if it still looks OK, then I'd try it with about one tank of 16:1 mix before going back to 32:1