Bike starts then dies out

Status
Not open for further replies.
one needs to peddle fast, slowly ease out the clutch while still peddling and keep peddling until motor runs enough to pull on its own
 
one needs to peddle fast, slowly ease out the clutch while still peddling and keep peddling until motor runs enough to pull on its own
You really think that i didnt do that? look ipeddle fast then the bike die out after the engine sputters for a bit
 
1. this forum gets newbies all the time saying their engine won't start or won't run right
2. in the top yellow section of the 2 stroke section of this forum are two threads with all the needed information to make sure everything is right so that the engine runs
3. no one reads these two threads and wants to be baby'ed and held by the hand
4. we experienced mechanics need to stand up for ourselves and just point them to the two threads, nothing more.
5. in the rare case they have an extraordinarily weird problem then we can help after they have done everything listed in those two threads
 
Check your jet. Mine came unscrewed and had the same problem. Tightened it back in place and good as new.
 
Thanks Jaguar,,, thats what I like about this forum... Up at the top of the 2 stroke forum in Blue...😁👍

Lots of posted info too help folks get things going...

Funny that very few share what they did too try to get the engine fired up,,, all they say is that it won't start...

101+ things could be the culprit ,,, purhaps they dont know what too ask...

Is there mixed fuel in the fuel tank... Ha

I had too ask you know 👍

Heres the link
(247) Engine wont start? TROUBLESHOOTING GUIDE | Motored Bikes | Motorized Bicycle Forum https://motoredbikes.com/threads/engine-wont-start-troubleshooting-guide.9619/
LOL why are you responding to a post from 4 years ago?
 
Status
Not open for further replies.
Back
Top