what tool removes small drive cog gt 80

sp1ke

Member
Local time
9:42 PM
Joined
Dec 16, 2016
Messages
90
Location
huntingdon
hi im a little stuck the small drive cog on my new engine wont come off i need the extractor pulling tool ive tryed a bicycle crank extractor but it was to big

does anyone know where this tool is used is it a motorcycle one like the clutch ?

where can i get one ?

or

what size is it ?
 
They sometimes send the puller tool with the motor. It's meant for the big and small gears and the sprocket on the other side. You can remove its center bolt and screw it in the opposite side and use the other end.

If you don't have this tool then you are really in for a fight or it's time to start hunting for a pipe with the same threading and hope you get lucky.

Many dealers sell that part online. Any reason why you need to remove your small gear?
 
http://www.bikeberry.com/drive-sprocket-removal-tool.html

is this the one ? shame im in the uk and cant get all the awesum stuff u guys do if this is it ill try n find it in the uk or at least somewhere that delivers


i havent got the tool didnt come with any of the engine kits ive worked on

from what i can tell this is the tool and
i dont have that large a dieamiter on my tap n die set so making one will b hard
i can only find 2 usa based stores selling it bikeberry us delivery only
and spooky tooth im waiting to find out
 
Last edited:
crank stuffing and genral inspection
Well you have the all the info I can give I guess. All I can say is refrain from spending more than a few dollars on these since they really seem to be a stock part of many kits. Even gasbike throws them in with their cheap kits.

I have the foggiest clue what it's called
 
I hate it when I hear of a seller that steals the tool out of the kit when he sells it so he can charge an extra fee when the customer needs it.
 
oh snap good man ! awesum thanks frank 3 pounds from china vs the 23 pounds from the use

that helped u know i tryed a bunch of diffrent stuff on ebay thats the one i didnt try

i was looking spacifically for drive one forgetting it may be listed for the other end ( clutch )

china takes a whyle to here but is usually free usa is uber expencive and as long because of going through more secure customs





the canadian site im not sure if can deliver here but thanks anyway same price as the china ones about same delivery time but on another note i saw something very usefull on there

news and events
2015-07-15Service Bulletin
A recommended modification for all Magneto Starter coils (For engines manufactured prior to July 1 2015

so they fixed the timeing isue on newer engines ? this new engine ive got is far better built and i noticed the key on the magneto looked closer to 12 then the last one so im going to look in to that vs my old engine




thankyou everyone for the help



so in conclusion





the tool is spacific to these engines and not one likely to be found in a bicycle or motorcycle garage

the best recomendation for where to get one is here . com

http://www.ebay.com/sch/i.html?_odk...d=m570.l1313&_nkw=clutch+puller+80cc&_sacat=0


changing from .com to .co.uk made mine much cheaper so worth trying changing to your country


if your in the ( usa) and want it faster there are shops that sell them at a marked up price try the canadian site as is closest and cheapest

if not id try bikeberry or spookytooth
 
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.
s-l64.jpg
s-l500 (1).jpg
 
Back
Top