What to do

B

Branddenn

Guest
I recently took 2 frames and made 1. I took the rearend of a stingray and weldered it to a cheetah. When i put the motor on i noticed my sprockrt didnt line up. Id have to move the motor about 3 or 4 inches for them to line up. I dont want to ofset the balance. What can i do?
 
if you need different pics just let me know i
 

Attachments

  • 20170109_052155.jpg
    20170109_052155.jpg
    116.2 KB · Views: 84
  • 20170109_060813.jpg
    20170109_060813.jpg
    147.2 KB · Views: 94
  • 20170109_060627.jpg
    20170109_060627.jpg
    156.4 KB · Views: 135
not sure how much work you want to do, but that last pic showing what looks like the bolt for the kickstand seems to have enough room to bolt or weld a pillow block and shaft with two sprockets on it

looks like you could take the chain in to a sprocket there in line with motor, then take it out from the 2nd sprocket in line with the wheel
 
not sure how much work you want to do, but that last pic showing what looks like the bolt for the kickstand seems to have enough room to bolt or weld a pillow block and shaft with two sprockets on it

looks like you could take the chain in to a sprocket there in line with motor, then take it out from the 2nd sprocket in line with the wheel

I think I have an idea of what your saying I was wondering if u could give me a diagram or a picture just so I could get an idea
 
Last edited by a moderator:
I'm not much with 'puters - put 'pillow block' into google & you'll see several shapes and sizes for ideas.
 
hay crassius i want to thank you for that adviese heres a look at what it turned out to look like
IMG_20170118_153605.jpg
IMG_20170118_153656.jpg
IMG_20170118_153642.jpg
 
Back
Top