Frankenstein
Deceased - Frankenstein 1991 - 2018
- Local time
- 11:51 AM
- Joined
- Jun 24, 2016
- Messages
- 5,035
I couldn't tell you unless I physically was looking at the parts and saw how long it was, from here I can't tell you if you can adjust it out with the 2 barrel adjusters.Well I was looking at previous threads and it looks as though several people believe the stock NT carb works just fine or just as good as the other carbs out there, especially if someone isn't racing their MB which I'm not.
I am currently looking because the previous clone carb I purchased off of eBay leaked due to a poor plastic molding of the cup, I fixed that with gasket seal and the leak stopped. Now I have an issue with the throttle cable being to long, & therefor to loose, & I have no clue as how to make the cable tighter. There's the little nubs on each end so I know they can not be cut so how in the hell do you tighten up the throttle cable?? Please don't tell me I have no choice but to wait on a new one.
You know that little noodle that sticks out the top of the carb? Well I have plenty of noodle like things and the related barrel adjusters that go with them. I had my Dellorto at one point and I ended up with a too long cable so I found a tiny barrel that would fit the end of the the carb barrel, and just removed what material I had to from the barrels so the length was spot on. The picture below is the same idea but with brake lever adjusters instead of carburetor parts. If you looked around your odd parts long enough you might find something, or at the very least use a small Allen head bolt and the appropriate sized drill bits to make a spacer of some sort.