Neo_Epoch
Member
- Local time
- 11:53 PM
- Joined
- Aug 14, 2017
- Messages
- 61
Hey, I had added a basic banana chamber to my 66/80 China chunk. Can't seem to get the motor running correctly with it. Had it running 'ok' for a little while, now it just seems like it will fire up after it sits for a while. Running stock cdi with ngk b5hs and ngk wire/boot, added oz 12v magneto, nt speed carb is on it. Plug is gapped at .020, middle slot on needle (5 slot needle), cut open the punisher symbol looking black air filter cover for more air flow, current fuel is 28:1 and will go to 32:1 at next fillup.
Tried different needle settings, didn't seem to make much of a difference.
Gonna try putting the stock muffler back on today to see if it will run correctly. Banana pipe pictured is the exact chamber in question.
Tried different needle settings, didn't seem to make much of a difference.
Gonna try putting the stock muffler back on today to see if it will run correctly. Banana pipe pictured is the exact chamber in question.
Attachments
Last edited: