Proper gapping

braddenn

Member
Local time
6:49 AM
Joined
Jan 12, 2017
Messages
47
I am wondering if there is a specific gap size that goes between the cdi and the magneto any info would be great full. Thank you
 
You just 50/50 the gap on both sides if possible..sometimes how it mounts isn't really adjustable, as long as it's not touching anything it will work.
 
motor case has a raised boss to hold armature exactly right - as 4 bolts begin to get tight, wiggle armature till you feel it seat itself on that boss
 
A thick piece of paper usually gets you where needed, if there's any adjustment.
 
Back
Top