Cruzzer Motorbikes and WhizzerPaul

Sounds like the truth hurts bet y'all don't SCAM me again,p.s. sticks an stones.
Paul, the only way to stop all this Joe Linn Scammer rhetoric is for him to face up to the fact that the cruzzer complaints are factual and for him to fess up and stand behind what he is putting out. He doesn't want to hear anything about standing behind warranty. Warranty is not a part of his vocabulary. I sent you and Joe pictures/videos of cruzzer cylinder valve seat failure to which neither of you responded. I can understand do nothing Joe not responding but you left me hanging out to dry by not acknowledging or responding when I brought this and the crankshaft sliding left, locking up the engine to your attention. The cam cover had so much welding slag under the right side crank bearing that when pressed in, it was seated at an angle then slammed in to make cam cover fit. Strictly bulls**t amateur motor building s**t and sold as new.???? The unfortunate thing, was that 3 kits and one engine was purchased, which didn't mean s**t to Lizzard Joeand apparently to you. The half ass, eat the cam alive lifters, are a joke.
Steve Jake, 954-857-1041, pictures to all interested parties!
 
Paul, the only way to stop all this Joe Linn Scammer rhetoric is for him to face up to the fact that the cruzzer complaints are factual and for him to fess up and stand behind what he is putting out. He doesn't want to hear anything about standing behind warranty. Warranty is not a part of his vocabulary. I sent you and Joe pictures/videos of cruzzer cylinder valve seat failure to which neither of you responded. I can understand do nothing Joe not responding but you left me hanging out to dry by not acknowledging or responding when I brought this and the crankshaft sliding left, locking up the engine to your attention. The cam cover had so much welding slag under the right side crank bearing that when pressed in, it was seated at an angle then slammed in to make cam cover fit. Strictly bullsh*t amateur motor building sh*t and sold as new.???? The unfortunate thing, was that 3 kits and one engine was purchased, which didn't mean sh*t to Lizzard Joeand apparently to you. The half ass, eat the cam alive lifters, are a joke.
Steve Jake, 954-857-1041, pictures to all interested parties!
The 10mm bolts on the head thred into the head too making it impossible to torque the head an keep it that way they bottom out on the head and wount torque down
 
Put simply ..you have to be smarter than what you're working on or you'll always struggle and blame others.
I'd like to see pictures of all these things struggling jake and majicfingers.....start there and maybe you can get help with it all.
 
Put simply ..you have to be smarter than what you're working on or you'll always struggle and blame others.
I'd like to see pictures of all these things struggling jake and majicfingers.....start there and maybe you can get help with it all.
My problem has be solved... I don't and wount do business with paul or slope head lin I'm a retired machinist these bikes they sell are unsafe and shouldn't be on the market paul keeps runnin his pie hole I'll pay him a visit ya he lives in southern indiana google maps is bad ass hes one lucky boy is all I can say he scams people an blames their mistakes one other people they both are scammers and i wouldn't let them work on paper airplanes.
 
My problem has be solved... I don't and wount do business with paul or slope head lin I'm a retired machinist these bikes they sell are unsafe and shouldn't be on the market paul keeps runnin his pie hole I'll pay him a visit ya he lives in southern indiana google maps is bad ass hes one lucky boy is all I can say he scams people an blames their mistakes one other people they both are scammers and i wouldn't let them work on paper airplanes.
I'm glad you got your problem solved and your done.
Maybe we can see some pictures of the other guys motor. See what's really going on. I'm interested now.

Ray
 
Best little motor 79cc predator with a gear drive
 

Attachments

  • 20180623_172418.jpg
    20180623_172418.jpg
    213.2 KB · Views: 258
From what I've heard, the factory in Taiwan that produces the "Cruzzer" is the same that manufactured the bikes for Whizzer-USA.
Since WhizzerUSA owns the rights to the name, the factory can't legally call them a "Whizzer", so they are selling them under the "Cruzzer" name instead.

I've had no dealings with Joe Lin (heard a lot of horror stories about his customer service), but, have dealt quite a bit with Whizzer-Paul.
Paul is an honest guy and great to do business with.

$2k sounds a bit steep for one. I'd rather save some money and find a good used NE-5 (preferably a 2005 model).
What you heard about Lin is absolutely all true. He is the biggest thief that will sell you product and deny any problems you might encounter. He is the biggest lying jerk you will ever run across.
Anyone doubting me I will text you proof.
 
What you heard about Lin is absolutely all true. He is the biggest thief that will sell you product and deny any problems you might encounter. He is the biggest lying jerk you will ever run across.
Anyone doubting me I will text you proof.
Whizzer paul is a scammin b**ch too I purchased a ne5 engine off him the head wouldnt keep toqued come to find out the 2 10mm bolts threaded into the head itself an bottomed out when tightened leaving no more room for a proper toque also carb that came with it had machine metal in the bowl got told I put it there. Ya right whizzer paul nor joe slopehead lin would stand behind their product. I spent 550.00 with the prick may as well flushed it I dont care what other people say about dick head paul hes a scammer no 2 ways about it hes lucky I didn't stop in an pay his ass a visit when I was in southern indiana. The whizzer motor is junk over heats an all around there a pos. Called em throw away motors for a reason. I put a 79cc predator engine on my 99 original whizzer chain drive with automatic clutch goes 45mph to 50 mph you want to go any faster buy a real motorcycle.....
 
Well...I've read your comments about Joe Lin and must say that my personal dealings with him have been fine. I ordered some parts for my '99 WC1 through ebay and they arrived within the specified time, no problem at all.
Happy New year.
Dave.
 
Well...I've read your comments about Joe Lin and must say that my personal dealings with him have been fine. I ordered some parts for my '99 WC1 through ebay and they arrived within the specified time, no problem at all.
Happy New year.
Dave.
Dave #22,
Oh, Scammer Joe will sell you parts/stuff all day long. As long as you spend money he will sent you stuff. Just don't look for him to stand behind anything. Bought 3 new cruzzers from him. Warranty is none existent. He is a lieing thieving prick.I sent him countless emails and pictures of problems and he never replied. Don't know what you bought but don't expect it to live very long without failure.
The new cruzzers have the same valve/bearing problems as the junk that he made for the unexpecting whizzer distributor in Tex. I had both new and old engines fail. You'll know it happening when engines start puking oil out the breather. Text me if you want pictures. Better yet ask him to sent you the pictures that jake sent him. Whizzer Paul threw me under the bus to when I sent him pictures. They both never replied and I bought a new Ceramic engine from Paul when the 99 failed. Did that before I knew the short coming of any engine joe produced. Keep reading the forum. I'm not the only one disgusted with Slopey Joe.
Have a Nappy New Year too,
jake: 954-857-1041//////jakeslake@aol.com
PS. Call, Text, Email Me anytime.
 
Back
Top