Double springer issues

INTP_ty

Active Member
Local time
3:48 PM
Joined
Sep 25, 2017
Messages
491
Look at the width of the axle. I’m short both ends like a half inch.

?

If I squeeze it together, those bolt/nuts are going to hit my spokes

Barrel washers?

This is the first fork I’ve used where it was way wider.
Way wider...
 

Attachments

  • F22636EA-7899-4C92-A4F4-C21F8E0CE7C1.jpeg
    F22636EA-7899-4C92-A4F4-C21F8E0CE7C1.jpeg
    202.2 KB · Views: 160
  • A31F717B-4B17-4831-983D-F400BFACCB6F.jpeg
    A31F717B-4B17-4831-983D-F400BFACCB6F.jpeg
    218.9 KB · Views: 165
Can you put the rocker on the inside, shows on the outside now...........Curt
 
Can you put the rocker on the inside, shows on the outside now...........Curt

Lol wil do.
Thanks!

I was just going to ask about those bolts/nuts. Is that what I’m supposed to be using? I need to tighten them up yet but if I do, it ain’t gonna rock?
 
Bolts should have a collar on them so they can only be tightened so far, or a brass bearing that is just a slit longer then the thickness of the rockers........Curt
 
Bolts should have a collar on them so they can only be tightened so far, or a brass bearing that is just a slit longer then the thickness of the rockers........Curt

I can’t find those collared bolts on eBay
 
Back
Top