Slowly but surely . . .

This project is taking a while (cash flow).


20180916_104851.jpg
 
Can you take a picture of the bottom of the fork legs from the front? I have a feeling you need to swap you fork legs around. Reason I say that is 5 1/2" is pretty wide for a front wheel.
 
Can you take a picture of the bottom of the fork legs from the front? I have a feeling you need to swap you fork legs around. Reason I say that is 5 1/2" is pretty wide for a front wheel.


OHHHHHHH, snap!!! Thank you that is what it needs. Serious facepalm!!
You rock!! Can I have a Homer Simpson DOH!!!!


EDIT: Spoke too soon.

So I swapped the fork tubes, and the forks are still too wide for the axle.
Going to have to get a longer axle. Thanks for the help though.
 
Last edited:
Tubes swapped. The dropouts almost need to be welded to the outside of the inside of the tube. The axle length is 5 1/2 inches but the width of the dropouts are 6 and the mark halfway between the 1/4 and 1/2 inches. (Sorry I don't know the all of the tape measure marks yet.)
 

Attachments

  • 20190327_173133.jpg
    20190327_173133.jpg
    121.6 KB · Views: 229
I was hoping that was it. Maybe get in touch with Imperial to see if they can help out with the axle.
 
Back
Top