dubbstepped1
Member
- Local time
- 11:24 PM
- Joined
- Nov 7, 2018
- Messages
- 32
Me, and my friend built him a motobike, we installed a fairly new head, and also a hi-performance carburator, My question is;
The bike fires up well enough, first try even, but the problem is max speed is approximately 8-12 miles an hour, also i noticed there was two sections on gas line, that was barley seeping, that one i put zip ties on, would that cause bike to have no power, i figure its probably the head or carb, but im unsure where to start, if someone could give me some advice, i'd really apreciate it................(here's some pic's/if they'll help/also**"the motor is an 80cc goplus motorized bicycle motor., "thank-you".......
The bike fires up well enough, first try even, but the problem is max speed is approximately 8-12 miles an hour, also i noticed there was two sections on gas line, that was barley seeping, that one i put zip ties on, would that cause bike to have no power, i figure its probably the head or carb, but im unsure where to start, if someone could give me some advice, i'd really apreciate it................(here's some pic's/if they'll help/also**"the motor is an 80cc goplus motorized bicycle motor., "thank-you".......