Parts are flopping around like a crappie

INTP_ty

Active Member
Local time
5:09 AM
Joined
Sep 25, 2017
Messages
491
So I’ve decided that I want to keep the chain guard. I’m in need of a 1” front engine mount adapter. Anyone have a link or if you’re a vendor, shoot me a PM. & will I need shims?


The tank and chain tensioners slide around this small 1” tubing like nothing.
 

Attachments

  • 6F1CF822-B670-4E11-B594-E632D3940C76.jpeg
    6F1CF822-B670-4E11-B594-E632D3940C76.jpeg
    229.4 KB · Views: 113
  • 9E5A9CF7-C7AE-4F98-8B64-FC80077260A9.jpeg
    9E5A9CF7-C7AE-4F98-8B64-FC80077260A9.jpeg
    155.2 KB · Views: 124
  • 65A54685-81EC-497E-9241-505C70EE5589.jpeg
    65A54685-81EC-497E-9241-505C70EE5589.jpeg
    158.6 KB · Views: 121
Oh, that type of bike. Well, you'll need to use the adapters to install. It will be really hard tho. Also, if your chain idler thingy is flapping around, you should get the one that holds it with 4 bolts instead of 2. It's like this:
88728


And then you can put a thick rubber/leather sheet under it for more grip. Worked for me!
 
So I’ve decided that I want to keep the chain guard. I’m in need of a 1” front engine mount adapter. Anyone have a link or if you’re a vendor, shoot me a PM. & will I need shims?


The tank and chain tensioners slide around this small 1” tubing like nothing.
Looks like a girls bike!
 
For the front mount I would make a plate and use 2 exhaust clamps to spread the load.
 
Okay this part doesn’t fit on this bike either. I’m pretty sure with my last bike, The sprocket sat right on the spokes. With this one, it hits the dust cap. It’s definitely not even close to the spokes.


Hole saw??? I know someone ran into this problem.

I think I might just buy a different bike
 

Attachments

  • E6503F9D-21FF-4394-BFD1-717ED2134471.jpeg
    E6503F9D-21FF-4394-BFD1-717ED2134471.jpeg
    208.7 KB · Views: 91
  • BFDF0368-E38B-41FD-B22E-B35665ED82B7.jpeg
    BFDF0368-E38B-41FD-B22E-B35665ED82B7.jpeg
    188 KB · Views: 101
Last edited:
Back
Top