Need help with mounting positions

[Will'smotobikes19]

My HS142 is in the way of the chain too on the occ. Don't know what to do about it maybe make a tensioner that pushes it down connected to mount bracket or motor maybe use a spring loaded derailleur off a mountain bike.

 

[MotoMagz]

My HS142 is in the way of the chain too on the occ. Don't know what to do about it maybe make a tensioner that pushes it down connected to mount bracket or motor maybe use a spring loaded derailleur off a mountain bike.

Maybe like this.....

 

[Ozzyrules420]

That bike is pretty sick tbh but the one I'm putting on mine is a gx160 not a 50cc my older bike has that motor

 

[Will'smotobikes19]

Oh meant pedals I guess engine chain might be a difficulty too.

 

[Ozzyrules420]

Ok so this ain't going good for me at all the f***ing crank arm wont come off the puller stripped out the threads I have beat the living f*** outta it and it still wont come off should I try and heat it up to get it off

 

[Chainlube]

You only have to put some tension on the crank shaft with your puller and then give the puller bolt a good smack with the hammer and the crank arm will pop off.

 

[Will'smotobikes19]

someone say mounting positions

 

[Ozzyrules420]

someone say mounting positions

I like that mount it looks like it would work