T
TheDustyShredder
Guest
is buying a motor mount neccesary for the OCC Stingray?
I found a Schwinn OCC chopper bike for 40$. How necessary is it to get the motor mount for this bike? is it something that could be fabbed up pretty easily or what? does anybody have any close up pics I could see? I have the 80 cc Happy Time kit and I work at a hardware store, I think I could...
motoredbikes.com
If I may just revive this:
I'm building a stingray up with an electric start 198cc engine from Duromax, 4 stroke. My thoughts here are either buying that cnc mount and a cnc plate, or making one by bending a plate to match the curve, and two 1/8" thick straps, also bent to match the curve, bolting those onto the frame securely, and then having another plate bolted onto the engine, and then bolt that onto the base plate with washers and rubber spacers for vibration control. It would be admittedly ugly, but it would work, I hope. I plan on putting a 10 speed cassette on the rear wheel and driving that with the engine, so I don't need an offset. That's provided by the jackshaft.
Last edited by a moderator: