My 1st build.

[Mark 1971]

Yes I have skills. But no shop or anything to use. Atm.

 

[Mark 1971]

Maby i can use brazing rod an copper pipe. Easy to work with. Might work?

 

[Chainlube]

A muffler shop might be able to help if you tell them where you want it.

FLYPIG EXHAUST W/ EXPANSION CHAMBER Exhaust System Muffler Pipe Dio Elite SYM 50 Dio SA50 SR50 SK50 SYM DD50 Arnada 50 Dio 50 DD50 Jolie 50 DIO50 for Honda AF18 AF24 AF27 AF28 AF30, Complete Systems - Amazon Canada

FLYPIG EXHAUST W/ EXPANSION CHAMBER Exhaust System Muffler Pipe Dio Elite SYM 50 Dio SA50 SR50 SK50 SYM DD50 Arnada 50 Dio 50 DD50 Jolie 50 DIO50 for Honda AF18 AF24 AF27 AF28 AF30 in Complete Systems.

www.amazon.ca

 

[Chainlube]

Put the expansion chamber where the stock one is now and run a stinger to the back with the silencer.

 

[Street Ryderz]

Maby i can use brazing rod an copper pipe. Easy to work with. Might work?

You can get scooter pipes that with a bit of manipulation fit well and allow a good muffler out back, exhaust flow must be decent if you want torque and most copper pipe is a bit small, but if you can find some with around 1" I.D. it will work.

 

[Mark 1971]

You can get scooter pipes that with a bit of manipulation fit well and allow a good muffler out back, exhaust flow must be decent if you want torque and most copper pipe is a bit small, but if you can find some with around 1" I.D. it will work.

 

[Mark 1971]

Where do i get a oval-shaped exaust flang from. Stock is small round, poo poo is gonna be worse.but i could separate the flex from its expansion chamber as well as muff yes?

 

[Mark 1971]

and ohh btw. I used to own a muffler shop about 20 year's ago lol

 

[Chainlube]

and ohh btw. I used to own a muffler shop about 20 year's ago lol

That's cool ,so you know all about muffler relocation. Us the stock flange and and cut off the rest.

 

[Street Ryderz]

Where do i get a oval-shaped exaust flang from. Stock is small round, poo poo is gonna be worse.but i could separate the flex from its expansion chamber as well as muff yes?

That's what I thought as well, but when I tried to hog it out (open it up) I got to around 17mm and went through the inner wall of the coupling making it useless due to now leaking. Not sure where you could buy a flange I tend to make my own but the stock exhaust's flange can be cut off and reshaped as needed.