Source for good mag rims/or spoke rims for 200cc motors

[gdao]

CDHPOWER 26" Rear Mag Wheel/Bike
https://www.ebay.com/itm/284300288420?hash=item42319e21a4:g:BpQAAOSwf3ZguIaH
are the cdh ones any good?

So theres a lot of these chinese rims out there , ive heard lots of stories of them cracking/breaking apart, so i assume some really dont take impacts well.
OR are people better off with heavy gauge double walled spoked rims?

Anybody have good sources of heavy duty double wall rims w/ disk brakes for 26" incher cruiser? . im not sure where to look. Just know it needs to be beefy..

Any recommended sources for either. I am not familiar with either rims higher end rims so. Wanting to have better tires/rim for the higher torque engine.

Does anyone have experience with both sorts of heavy duty rims on the bigger motors? And do you recommend one over the other?
thanks

 

[Member 30571]

Welcome to MotoredBikes . You don't want the 6 spoke mag rims they are known to crack.
You're better off going with the 3 spoke mag rims..... Others will chime-in and tell you more.

 

[DieselTech]

If you want a heavy duty double wall rim, with 12gauge spokes set up for disc brake
Take a look at Grubee hd wheel at grubee inc .com. they make it in single speed or 7speed setup.

 

[DieselTech]

I can get you pics of mine if need be. I got the grubee HD rear wheel on my beach cruiser.

 

[DAMIEN1307]

CDHPOWER 26" Rear Mag Wheel/Bike
https://www.ebay.com/itm/284300288420?hash=item42319e21a4:g:BpQAAOSwf3ZguIaH
are the cdh ones any good?

So theres a lot of these chinese rims out there , ive heard lots of stories of them cracking/breaking apart, so i assume some really dont take impacts well.
OR are people better off with heavy gauge double walled spoked rims?

Anybody have good sources of heavy duty double wall rims w/ disk brakes for 26" incher cruiser? . im not sure where to look. Just know it needs to be beefy..

Any recommended sources for either. I am not familiar with either rims higher end rims so. Wanting to have better tires/rim for the higher torque engine.

Does anyone have experience with both sorts of heavy duty rims on the bigger motors? And do you recommend one over the other?
thanks

I know your looking for something "super duper" etc. but i can only tell you what im using for mags and disk brakes etc, and it works fine for me...Here they are as well as some of the other things you will need along with them to attach them to your bike.

BBR Tuning 26 Inch Heavy Duty 3 Spoke Motorized Bike Mag Wheel Set

Are you looking for a heavy-duty wheel set built for speed? Sick of having to make constant adjustments and to your spoked rim? Then the BBR Tuning 26 Inch Heavy Duty 3 Spoke Motorized Bike Mag Wheel Set is exactly what you’ve been looking for! Built to be disc-brake ready and pre-installed with...

www.bikeberry.com

And two of these, one for each wheel:

BBR Tuning Billet Aluminum Disc Brake Caliper Bracket

This works with motorized or standard bicycles and allows you to install a disk brake if you don't have the necessary mounts. No more rim or coaster brakes.

www.bikeberry.com

Freewheel sprocket for the pedal side of things:
Be aware that its a 22 tooth sprocket that maybe a larger diameter pedal sprocket than what you previously had and may require lengthening the chain:

Sunlite Single Speed 22 Tooth Sprocket

The Sunlite Single Speed 22 Tooth Sprocket is what you need to eliminate any mods you need to make to a wheel, giving you a more secure rear wheel sprocket assembly.

www.bikeberry.com

Dual pull brake lever for the disk brakes since you already have clutch lever on the left side:
Get the brake cables from a local bicycle repair shop.

Sunlite Alloy Dual Brake Lever

The Sunlite Alloy Dual Brake Lever - operate your front and rear brakes with just one pull. Revolutionize your riding! Shop our selection today.

www.bikeberry.com

And lastly, my bike with the finished product for you to see...DAMIEN

 

[DieselTech]

Here is my set up, rear is a grubee HD wheel with a 203mm rotor, should of went with 220mm thou. Front is a wheelmaster double wall hd wheel with 180mm rotor.

 

[DAMIEN1307]

Here is my set up

You also used an "Adel" clamp like what i used for my front caliper to adapt to the frame...Aren't we both just so clever...lol...Mine is off an F-16, where did you find yours???...DAMIEN

 

[DieselTech]

Lol! Yes of course we are. I also built my own rear caliper bracket, cause the china ones are oh so great! & kept bending.

 

[DAMIEN1307]

I also built my own rear caliper bracket,

Funny that you should mention that too...lol...DAMIEN

Ps...My "Adel" clamp came from an F-16, where did you get yours???

 

[DieselTech]

You beat me too it. Them clamps are the stainless steel ones off of amazon. Heres my caliper bracket made out of 1/4" stainless steel plate. Ain't going to bend that one & if it does its destroying the bike frame.