79cc Predator with Schwinn OCC Chopper

[jeffreykogan]

Hi, I was wondering if anyone knows how to mount a 79cc Predator motor to a Schwinn OCC Chopper Bike? I'm guessing the standard mount won't work since the frame is different, so does anyone have any suggestions?

-Jeff

 

[Chainlube]

@DistantWolrld101 has done some different OCC setups, he would be the one to consult.

 

[Street Ryderz]

Hi, I was wondering if anyone knows how to mount a 79cc Predator motor to a Schwinn OCC Chopper Bike? I'm guessing the standard mount won't work since the frame is different, so does anyone have any suggestions?

-Jeff

There is no point in looking at Pedal Choppers for a four stroke mount, Jim doesn't make them or anything for the four strokes, the offset is not really an issue with a four stroke ether as it is with the 2 stroke. Mounts for regular v frame bicycle won't work ether without modification and if your able to do some fab work there are alot of choices and possibilities, but if you want bolt on then you'll have a hard time finding anything that will really work.

 

[jeffreykogan]

There is no point in looking at Pedal Choppers for a four stroke mount, Jim doesn't make them or anything for the four strokes, the offset is not really an issue with a four stroke ether as it is with the 2 stroke. Mounts for regular v frame bicycle won't work ether without modification and if your able to do some fab work there are alot of choices and possibilities, but if you want bolt on then you'll have a hard time finding anything that will really work.

alright thank you, much appreciated.

 

[jeffreykogan]

@DistantWolrld101 has done some different OCC setups, he would be the one to consult.

ill shoot him a message, thank you

 

[DistantWolrld101]

you can buy a 4-stroke mount that fits the 79cc predator it is kind of like the normal 4-stroke mount

then get 2 Ubolts drill holes in the front and back of the mount and u bolt it down my suggestion is muffler clamps since they are stronger

make alignments and everything before drilling and bolting down is all i got to say


you will have to remove the gas tank and do a few other things to make it fit, BUT it will fit without cutting the frame

 

[DistantWolrld101]

@DistantWolrld101 has done some different OCC setups, he would be the one to consult.

I have like 20 messages xD i kind of went A wall i didn't even know he messaged me lol



I Think i should just make a Post on how to set up a 2-Stroke OOC A 4-Stroke OCC A 79CC OCC A 212CC OCC and a GY6 OCC all in one from non welding(not my fault if you get hurt) to welding with list and links to parts and if people ask about OCCs they everyone can just refer that post xD