I did it, I crossed over

I was planning on it. She wants to show these guys up. I'm 5'8-9" an she is easily a foot shorter than me. An she is going to show her male friends how its done. An of course I have to show her handy work off here, I'm her proud teacher. Kevin can't weld worth a ham, so I'd never show his welds here. Mine are bad enough. lol.
 
If you want a cheap big carb to upgrade a honda gx200 carb has pretty much the same bolt spacing. Goes from 12mm to 19mm, the only you need to figure out a throttle set up and either get a pod filter or cut the stock filter assembly wider (so the choke fits) you'll be good to go!
 
If you want a cheap big carb to upgrade a honda gx200 carb has pretty much the same bolt spacing. Goes from 12mm to 19mm, the only you need to figure out a throttle set up and either get a pod filter or cut the stock filter assembly wider (so the choke fits) you'll be good to go!
How much of a seat of the pants dyno boost does it give?
 
Thread topic,

I did it, I crossed over​

OIP.8GUyJPasDzfrBnfZ6qNTxgHaHa

 
I finally did a 4-stroke 142F kit a while ago, and it's my favorite of the bike kits. The TWEAKER in me wants to fix the sub-par carburation on it- not larger, just a better fueler, but other than that, I think the 4-stroke kits work well. Maybe a cooler-looking exhaust set up. Just Tweaks though.
 
I finally did a 4-stroke 142F kit a while ago, and it's my favorite of the bike kits. The TWEAKER in me wants to fix the sub-par carburation on it- not larger, just a better fueler, but other than that, I think the 4-stroke kits work well. Maybe a cooler-looking exhaust set up. Just Tweaks though.


That is the engine I have for this bike. I will be starting a thread soon on the build. My little apprentice will be coming over today to see her engine and discuss the details. Then I will begin purchasing all the paint, and customizations she is going to want.

First we will be looking for safety gear for her. No way am I going to let her weld and work like me. lol. Her parents would kill me if she had burns all over her hands and arms. Seeing as they are my bosses, I'd probably get fired too, lol. The slag and sparks just bounce off of me, I also bath in 150 degree water for an hour or two a day, she is not that tough, yet. The hardest part is, she is so TINY!! I can lift her with one arm.

The thread will be a long one, she will be learning all the tools I have as she goes. She's already asked if she can bring her " friend" ( I'm guessing the guy she likes) over when she learns to weld, to show him she can do it and he can't. lol. This little gal is going to be a heart breaking tom boy. I can already see all the guys she makes cry in the future. lol.

Stay tuned for the thread, it is coming soon.
 
Back
Top