Mossy
Well-Known Member
- Local time
- 4:56 AM
- Joined
- Jan 7, 2022
- Messages
- 2,624
The 070....Who makes that 1, & what are them 2 aluminum plates on the side for? Plates on right side of pic?
The 070....Who makes that 1, & what are them 2 aluminum plates on the side for? Plates on right side of pic?
MB rebel got the windowed coaster brake sprockets...What do I need to know to make a windowed piston for a reed valve engine build? Like window location, window size, shape of window? I'm planning on using a 49mm steel sleeve cylinder & either g2 reeds or the cdh oz reed set up. Any help or ideas would be appreciated.
That gear will pass over the brake arm. No need to remove it. I've been cutting my gear hole bigger..2" hole saw. I made a crude jig to guide the pilot bit so the cut is centered.MB rebel got the windowed coaster brake sprockets...
And a NOS Bendix... The grease is 60years old and needs a repacking...That gear will pass over the brake arm. No need to remove it. I've been cutting my gear hole bigger..2" hole saw. I made a crude jig to guide the pilot bit so the cut is centered.
I've screwed the sprocket to a piece of plywood found center and used a hole saw... I've flattened out the dust cover an run it on the outside of the kit sprocket alsoThat gear will pass over the brake arm. No need to remove it. I've been cutting my gear hole bigger..2" hole saw. I made a crude jig to guide the pilot bit so the cut is centered.
I thought I smelled something funny......lolIsnt it funny an old man like me just pulls this stuff so easily right out of my backside like this ???...lol...lol.
Lol if you ever wiped out? From lack of food & delirious, You loose a little weight there to, from butt skin transfer to road & the brown streak that appears in your shorts. So it's a Win Win!!!When I first saw these evil bike motors, I was thinking I could lose some poundage. Then I started spending to much. An now I have way to much CG stuff to be called normal. 8 cg and more parts than a hobo can shake his stick at. Spend money, you lose weight, from the wallet and lack the f food!!
Will these fit the fat DIO reed cylinder? Can't seem to find reeds for it.Cheaper than the CDH stock ones and 6mm bolts... And it's got the clear Reid I was looking for...