This thread on reeds and related peripherals has now been restored as it has some great info that has been contributed by our members who are knowledgeable in this topic...DAMIEN
After page one the OP has never returned to say if the issue was resolved or if he is still hunting for the petals.This thread on reeds and related peripherals has now been restored as it has some great info that has been contributed by our members who are knowledgeable in this topic...DAMIEN
Carbon fiber was suggested to him...he totally rejected that idea and wants fiberglass as he considers this superior.I have some carbon fibre, I could lay up a sheet for the DIYer. Only cost $30 a sf.
The OP, Jaycee604 was there right up till page 18 rejecting the help others were trying to be helpful with.After page one the OP has never returned to say if the issue was resolved
Lol I tried to explain to OP that, how thick your reeds determines how stiff they will be & that it dont matter what material there made from. I found reeds from .013" - .060" when I was trying to help.Carbon fiber was suggested to him...he totally rejected that idea and wants fiberglass as he considers this superior.
The OP, Jaycee604 was there right up till page 18 rejecting the help others were trying to be helpful with.
Send @DieselTech a PM.... He knows about the stage 6, I get the sheets and make them... Your looking for one of these... but there may be other optionsI still don't know where to buy petal reeds for my fat DIO reed setup should I need to replace them. Anyone know a direct replacement? Or if there are any reeds made for other motors that will fit right in?
Do you know of any reeds that would fit right in as well? Say, something like dirt bike reeds from a Honda CR80, Suzuki RM80, Kawasaki KX65, etc etc?Send @DieselTech a PM.... He knows about the stage 6, I get the sheets and make them... Your looking for one of these... but there may be other options
I don't... I was looking at the Yz 80 from pictures looks really close... but without having both of them in hand to measure and compare them I can't say anything about it....Do you know of any reeds that would fit right in as well? Say, something like dirt bike reeds from a Honda CR80, Suzuki RM80, Kawasaki KX65, etc etc?
I would be interested in that sheet your runningAfter page one the OP has never returned to say if the issue was resolved or if he is still hunting for the petals.
I have some carbon fibre, I could lay up a sheet for the DIYer. Only cost $30 a sf.