i pulled the carb drain screw and it started then died

the carb fuel line filter the carb gasket carb gasket the head gasket with copper seal the adjusted throttle cable cap the adjusted throttle handle my chain
 

Attachments

  • IMG_0077.JPG
    IMG_0077.JPG
    243.1 KB · Views: 91
  • IMG_0078.JPG
    IMG_0078.JPG
    278.7 KB · Views: 85
  • IMG_0079.JPG
    IMG_0079.JPG
    193.4 KB · Views: 82
  • IMG_0080.JPG
    IMG_0080.JPG
    174.1 KB · Views: 86
  • IMG_0081.JPG
    IMG_0081.JPG
    124.6 KB · Views: 83
  • IMG_0082.JPG
    IMG_0082.JPG
    154 KB · Views: 100
  • IMG_0083.JPG
    IMG_0083.JPG
    284.1 KB · Views: 84
  • IMG_0084.JPG
    IMG_0084.JPG
    361 KB · Views: 84
Your spark plug boot isn't on all the way. Look inside the boot to see if you need the spark plug cap or not. That looks like one of those boots where you have to remove the cap from the end of the plug. They just screw off.
 
Your spark plug boot isn't on all the way. Look inside the boot to see if you need the spark plug cap or not. That looks like one of those boots where you have to remove the cap from the end of the plug. They just screw off.
ok I tried it and it's the same thing
 
it's the carb gasket
I use the intake gaskets for the carby that are made for me by @mark20...They are superior to the cheap Chinese ones that come with the motor kit, I also use this gasket linked below for the eshaust gasket as it is also superior to the one you've got.

 
Links to Amazon may include affiliate code. If you click on an Amazon link and make a purchase, this forum may earn a small commission.
Your spark plug boot isn't on all the way. Look inside the boot to see if you need the spark plug cap or not. That looks like one of those boots where you have to remove the cap from the end of the plug. They just screw off.
it kicks over for like four seconds then stops and has negative effect to throttle it seems like
 
I use the intake gaskets for the carby that are made for me by @mark20...They are superior to the cheap Chinese ones that come with the motor kit, I also use this gasket linked below for the eshaust gasket as it is also superiour to the one you've got.

i have permatex ultra copper, that'll work?
 
Links to Amazon may include affiliate code. If you click on an Amazon link and make a purchase, this forum may earn a small commission.
Back
Top