Clutch Bucking Bar Too long and Clutch Problems

dhennebry1

New Member
Local time
5:29 AM
Joined
Jun 17, 2022
Messages
11
Is my bucking bar normal? I ordered a 2 stroke engine on ebay and the bucking bar looks shaved.
As well as this, the bar does not push in far enough and it doesn’t disengage the clutch or let me put the cover on.
 
I’m very confused on how you noticed because i do not see it.
Lol
Notice the tread in the tyre's centre...The "point" of the treads are supposed to engage the pavement first...It then splays outward from that point...That is for the displacement of rain water etc. to move it away and outward from the tyre surface...You are no stranger to rain where you are at...lol...otherwise you are just drawing it inward into the tire not outward, so this could cause you to hydroplane...It will also increase your tyre wear.

Ps...Céad Míle Fáilte chuig na fóraim...lol.

e2d05da7-0063-4296-b030-ac0351a8a28e-jpeg.176611
 
I’m very confused on how you noticed because i do not see it.
Lol
I'm a motor toy builder, I "just have" to put things together right. If I see anything that could make your life miserable while you ride, I'll give you a heads up. You can take or ignore as you see fit. :ROFLMAO:
 
Is my bucking bar normal? I ordered a 2 stroke engine on ebay and the bucking bar looks shaved.
As well as this, the bar does not push in far enough and it doesn’t disengage the clutch or let me put the cover on.
If it were me, I would replace that bucking bar and bearing...I found it in the USA ebay but not finding it in the Irish ebay, but here it is in the USA ebay listing below.

 
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.
Back
Top