GW's Motorized
Well-Known Member
Does anyone know what the black oiley goo is that is coming out of my muffler? And how do I stop it.
I thought of running either 40:1 or 50:1 in my motor after a few tanks of gas, most likely going to be 40:1I run like 40 to 1 i use synthetic
You should look into the recommended mix, most of the bike engines don't last very long on leaner mixes.I thought of running either 40:1 or 50:1 in my motor after a few tanks of gas, most likely going to be 40:1
This.You should look into the recommended mix, most of the bike engines don't last very long on leaner mixes.
Here is a screen shot of fuel/oil mix ratio chart below...for the first 2 tank fulls, use a 25:1 mix ratio...Once it's broken in, go to a 32:1 mix ratio.Ok, im not sure what exactly I'm running ratio wise, I took the measure bottle and added about a quarter inch over the 40:1 ratio line for a heavier break in mixture.
You can take off the bottom cap like ImpulseRocket recommended to clean out the excess oil out of the exhaust.Does anyone know what the black oiley goo is that is coming out of my muffler? And how do I stop it.