Build ideas

Check this out, once mounted it will be like a 24" wheel. Slap a wide tire on it and it would be perfect for a 212.
That’s a good idea. I just wish they gave more measurements. I noticed that Puch maxi parts seem interchangeable to bicycles
 
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.
A 212 will need something welded to the frame, that thing would have to be real tight to do any good. IF it held, it would have to be tightened so much that it might damage your frame.
That’s what I was thinking. The torque would probably rip them right off.
 
You got a welder, as long as it's a mig welder, I'd say no better time to learn how to weld. It's a good skill to have, plus with the build your attempting it would be helpful.
 
You got a welder, as long as it's a mig welder, I'd say no better time to learn how to weld. It's a good skill to have, plus with the build you’re attempting it would be helpful.
I got the welder because on my last build most of my problems would have easily been solved if I had a welder. So I went and got one.

I have the Titanium 125 flux core welder
 
Going back to the 79cc predator. What kind of speed and torque can you expect out of these? Could I cruise around 30mph? Will it pull from a start?

I was measuring my frame today and think this will fit nicely. Plus have room for battery and stuff

Thanks to everyone who has replied! I don’t have anyone who know a lot about motorized bikes. Just bouncing around ideas. Want to plan this build much better than my last. I bought a lot of things I didn’t need.
 
Going back to the 79cc predator. What kind of speed and torque can you expect out of these? Could I cruise around 30mph? Will it pull from a start?

I was measuring my frame today and think this will fit nicely. Plus have room for battery and stuff

Thanks to everyone who has replied! I don’t have anyone who know a lot about motorized bikes. Just bouncing around ideas. Want to plan this build much better than my last. I bought a lot of things I didn’t need.
I have one on a mini chopper, I pull from a stop on it. It has a 8" rear wheel too. I mounted the engine vertical and switched out the carb to a PZ19 with home made manifold.
 
Back
Top