Many of us have used Mag wheels simplifying the process of securing the engine drive sprocket to the wheel as well as disc brake options. Choose the brand and style wisely. Damien will chime in on that subject.Opinions please: Right now I have spoke wheels with a sprocket adapter, would it be better to get mag wheels? How does the whole sprocket system work on mags?? Thanks
Opinions please: Right now I have spoke wheels with a sprocket adapter, would it be better to get mag wheels? How does the whole sprocket system work on mags?? Thanks
Everything you need to know right here...lol...I might add that these are the only things I would buy from BikeberryMany of us have used Mag wheels simplifying the process of securing the engine drive sprocket to the wheel as well as disc brake options. Choose the brand and style wisely. Damien will chime in on that subject.
Best of luck
Dennis
The bike I have now is a Kent Bayside Cruiser, so I can actually take off the 7 speed and replace it with the single speed sprocket?Everything you need to know right here...lol...I might add that these are the only things I would buy from Bikeberry
BBR Tuning 26 Inch Heavy Duty 3 Spoke Motorized Bike Mag Wheel Set
Are you looking for a heavy-duty wheel set built for speed? Sick of having to make constant adjustments and to your spoked rim? Then the BBR Tuning 26 Inch Heavy Duty 3 Spoke Motorized Bike Mag Wheel Set is exactly what you’ve been looking for! Built to be disc-brake ready and pre-installed with...www.bikeberry.comBBR Tuning Billet Aluminum Disc Brake Caliper Bracket
This works with motorized or standard bicycles and allows you to install a disk brake if you don't have the necessary mounts. No more rim or coaster brakes.www.bikeberry.comSunlite Single Speed 22 Tooth Sprocket
The Sunlite Single Speed 22 Tooth Sprocket is what you need to eliminate any mods you need to make to a wheel, giving you a more secure rear wheel sprocket assembly.www.bikeberry.com
This may be of help to you as well during installation, things like stretching the drop outs etc. so you have proper clearance for all moving parts.
Whats the best bike for a 2 stroke?
Were miles away, but I bet our side of the railroad tracks are pretty similar. Before I found cranbrook in trash, I picked up a 74 schwinn world traveler & a 74-75 schwinn varsity people were throwing away, was going to build 1 of them, but long skinny front forks were scaring me. They can be...motoredbikes.com
Yes, you'll have lots of room on the left side for a engine sprocket and a disc brake. You might even have to use a spacer.The bike I have now is a Kent Bayside Cruiser, so I can actually take off the 7 speed and replace it with the single speed sprocket?
A spacer in between the sprocket and disk also comes with that mag setup.Yes, you'll have lots of room on the left side for a engine sprocket and a disc brake. You might even have to use a spacer.
I know that, but I'm talking right side. He needs to center wheel for the engine side so might need a spacer for the right side.A spacer in between the sprocket and disk also comes with that mag setup.
He could do that, I didn't, even though it is just so slightly off center but not enough where I found it a concern for me.He needs to center wheel for the engine side so might need a spacer for the right side.
One could also simply use rotor shims under the sprocket side if the sprocket is only a little off center. They sell them in 1mm to 7mm thicknesses. This way the wheel can stay centered to the frame. Unless the sprocket is already too far out, then a new axle spacer set is definitely needed.I know that, but I'm talking right side. He needs to center wheel for the engine side so might need a spacer for the right side.