002..AS you can see, when engine clamp is secured properly there is NO space between the engine mount and frame.
torque bracket..Blue arrows are pointing at the back of clutch case and seat down tube. Red arrow is the bracket. This shot is looking down from the s
The sleeve between the washer/nut and the engine bracket give extra clearance for the nut and easier torquing, moves nut away from bracket 6mm studs..
001...The IDEAL angle in the "V" is 75 degrees. I'm sure a small variance will work, but NOT for me. Have not come across a 75 degree frame as of yet.
002..AS you can see, when engine clamp is secured properly there is NO space between the engine mount and frame.
003..Rear mount same as front. When installing line up the rear correctly and then work with the front. A front mount can be made as I do or bought fr
Al.Fisherman

002..AS you can see, when engine clamp is secured properly there is NO space between the engine mount and frame.

Al.Fisherman
As you can see there are NO gaps between the tube and engine mount. No binding on the cheap mounts/case.
 

Media information

Album
Proper engine mounting
Added by
Al.Fisherman
Date added
View count
1,148
Comment count
1
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top