I have disc-brake setup for the front but am awaiting the hub sto rebuild both wheels for their respective disc rotors. Headlamp and flasher pods are
Scratchbuilt dual brake lever has a micro-switch mounted underneath the lever housing and activated via the cable retaining-post.
Showing the saddle suspension setup. Bound springs from an ATB and rebound from good old Bunnings hardware. From which all the frame tubing etc., was
Paint is Metallic Charcoal and Gold enamel spray-cans although the phone pics aren't worthy. Saddle-bags are $2 supermarket cooler bags on a modif
I have disc-brake setup for the front but am awaiting the hub sto rebuild both wheels for their respective disc rotors. Headlamp and flasher pods are
Closeup of the business end shows the cold-air tube running under the Top-Tube to the standard air filter. Fitted a 0.76mm jet in the carby and adjus
Original flanged bean tank was filled-in at the flanges with scotchbrite pad and then covered in bondo and shaped. Saddle pan is cut from an old satel
R

I have disc-brake setup for the front but am awaiting the hub sto rebuild both wheels for their respective disc rotors. Headlamp and flasher pods are

  • reddbak
There are no comments to display.

Media information

Album
Updated Hardtail images
Added by
reddbak
Date added
View count
435
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top