Prev
Shows race filter back plate mounted on carburetor and blocking right side air jet completely.
Next
Prev
Old picture
Painted the filter cover. The first coat was done with bad paint ended up sanding down with 600, 800 and 1,000 grit paper then painted again...shinny
Shows back plate mounted to race filter and the gasket of race filter partially blocking intake opening
Shows race filter back plate mounted on carburetor and blocking right side air jet completely.
Shows back plate of new race filter it does not have any holes for air jets on either side of intake.
Shows stock filter without back cover on it is approx 3 x 3 inches square. There are tabs to hold filter off back plate and tabs on cover plate to lea
Shows crank Ben opening at intake. Believe this is venting un burnt gas vapors back to intake and is what causing gas in the filter box?
Next
msiert

Shows race filter back plate mounted on carburetor and blocking right side air jet completely.

  • Media owner msiert
  • Date added
There are no comments to display.

Media information

Album
Stock air filter box
Added by
msiert
Date added
View count
516
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top