Stinger motor, has roller bearings at the crank and piston wrist pin instead of bushings. We will see how they preform.
The plug that came with the engine. Looks a little short so I will be replacing with one that comes closer to the end of the threads.
Roller bearings on wrist pin.
The clips for the piston were oriented in the wron position. The opening was horizontal, glad I opened it up first.
Stinger motor, has roller bearings at the crank and piston wrist pin instead of bushings. We will see how they preform.
Studs on ther tang cleaned and a coat of JB Weld.
Along with using zip ties on the spokes I wound a piece of around 16ga wire around the line to strengthen it a bit more. Might be overkill but any wea
26" Schwinn Sidewinder, standard mountain bike with a front shock, 21 speed and a steel frame in case I decide to weld anything up in the future.
Lunardog

Stinger motor, has roller bearings at the crank and piston wrist pin instead of bushings. We will see how they preform.

There are no comments to display.

Media information

Album
My first build
Added by
Lunardog
Date added
View count
593
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top