The engine mounting plates made. I was going to have a go at making the frame as well but decided the tube i got was not for the job this time...
Getting a little more done each day...and the design changes every day as well...
A quick update on the project... The engine is fitted...I welded a sleeve over the saddle down tube then drilled the frame and fitted steel bushes in
the bike stripped and bolted to axle stands so i can work on it the top cross bar is cut off so the engine can sit low in the frame..the peddle sproc
The engine mounting plates made. I was going to have a go at making the frame as well but decided the tube i got was not for the job this time...
The engine...It's a villiers Midget 98cc. I also got this from E Bay for £10 this is a none runner but turns over...
The bike...Got it of E Bay for £20. I wanted a old style bike.. It's a Robinhood bike.
leepaulholtz

The engine mounting plates made. I was going to have a go at making the frame as well but decided the tube i got was not for the job this time...

There are no comments to display.

Media information

Album
My first go at a motored bike...
Added by
leepaulholtz
Date added
View count
352
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top