The front leaf spring- formed from flat stock I found in my Dad's barn
I used industrial spray adhesive to attach the fleece- but let it completely cure and it will work well. I jumped the gun and the fiberglass resin li
I covered the form with fleece, but it ended up rough and needed much filling and sanding. I would use fiberglass cloth. It would smooth better and
The beginning of my fiberglass tank cover- .25" form core board, cut to shape, the taped together with duct tape- this is mock up with masking tape.
The front leaf spring- formed from flat stock I found in my Dad's barn
The rear leaf spring made from 1.5" flat stock and stays make from .5" tube stock- brazed
4/08- when I thought I would use a rear fender- now I have a rear leaf spring instead
As of 4/08- still in process
H

The front leaf spring- formed from flat stock I found in my Dad's barn

  • Like
Reactions: jeffh
There are no comments to display.

Media information

Album
HoughMade Cycle Works Build
Added by
HoughMade
Date added
View count
592
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top