Media added by Al.Fisherman

Navigation

  1. Motorized Bicycles 1K
  2. Engines & Diagrams 67
  3. Antique Motorized Bicycles 44
  4. Videos 13
  5. Electric Bicycles 1
  6. Forum Pictures 68K
Browse albums

Media comments

  • sherron82
    IMG_20220530_172742055.jpg
    What kind of mag rims are those?
  • A
    IMG_0319.jpg
    DAMIEN1307 said:
    It is homemade, I used hand tools like files etc as well as hand held power tools on my kitchen table and my front porch...lol.

    My tutorial of how I built my bike has everything I used to build my bike and where it can be had.

    There is also a front mount you can buy that is very much like...
    Click to expand...
  • A
    IMG_0319.jpg
    Nicely done!
  • A
    20240320_184823.jpg
    Hey,
    New to motorized biking. Just got done building my first bike. Cool to see a community like this. How active is it?
  • DAMIEN1307
    IMG_0319.jpg
    It is homemade, I used hand tools like files etc as well as hand held power tools on my kitchen table and my front porch...lol.

    My tutorial of how I built my bike has everything I used to build my bike and where it can be had.

    There is also a front mount you can buy that is very much like...

Media statistics

Categories
6
Albums
1,661
Uploaded media
82,231
Embedded media
13
Comments
3,866
Disk usage
13.5 GB
HPIM2403..

HPIM2403..

  • 0
  • 4
Photo 8 of 59 Finish removing the cylinder jug and set aside. Don't be of concern if the gasket tears up at this time. When putting back together we w

Photo 8 of 59 Finish removing the cylinder jug and set aside. Don't be of concern if the gasket tears up at this time. When putting back together we w

  • 0
  • 4
HPIM2377

HPIM2377

  • 0
  • 3
58 Split case

58 Split case

  • 0
  • 2
56 Pry up gear

56 Pry up gear

  • 0
  • 2
07...Using a 14mm box wrench or socket tighten down on center bolt of removal tool. This is on tight so some effort will be needed. If you get to the

07...Using a 14mm box wrench or socket tighten down on center bolt of removal tool. This is on tight so some effort will be needed. If you get to the

  • 0
  • 2
28 Drive gear puller

28 Drive gear puller

  • 0
  • 2
26 Removing drive gear

26 Removing drive gear

  • 0
  • 2
003..Rear mount same as front. When installing line up the rear correctly and then work with the front. A front mount can be made as I do or bought fr

003..Rear mount same as front. When installing line up the rear correctly and then work with the front. A front mount can be made as I do or bought fr

  • 0
  • 1
002..AS you can see, when engine clamp is secured properly there is NO space between the engine mount and frame.

002..AS you can see, when engine clamp is secured properly there is NO space between the engine mount and frame.

  • 0
  • 1
001...The IDEAL angle in the "V" is 75 degrees. I'm sure a small variance will work, but NOT for me. Have not come across a 75 degree frame as of yet.

001...The IDEAL angle in the "V" is 75 degrees. I'm sure a small variance will work, but NOT for me. Have not come across a 75 degree frame as of yet.

  • 0
  • 1
54 Remove clutch drive gear nut

54 Remove clutch drive gear nut

  • 0
  • 1
01... Remove the retaining bolt. It was on so tight that I had to clamp vise grips to the screwdriver in order to both turn and exert enough down pres

01... Remove the retaining bolt. It was on so tight that I had to clamp vise grips to the screwdriver in order to both turn and exert enough down pres

  • 0
  • 1
47 Nut removed note washer

47 Nut removed note washer

  • 0
  • 1
43 Notice washer and spring

43 Notice washer and spring

  • 0
  • 1
41 Remove star nut

41 Remove star nut

  • 0
  • 1
30 Pulled key

30 Pulled key

  • 0
  • 1
21 Coil sprocket cover removed

21 Coil sprocket cover removed

  • 0
  • 1
Photo 1 of 59 Remove engine from bicycle and place on an uncluttered, clean work area. Easier to keep track of both parts and tools.

Photo 1 of 59 Remove engine from bicycle and place on an uncluttered, clean work area. Easier to keep track of both parts and tools.

  • 2
  • 1
Roller bracket mounted

Roller bracket mounted

  • 1
  • 1
seafoam.jpg

seafoam.jpg

  • 0
  • 0
bike.jpg

bike.jpg

  • 0
  • 0
1016091100-01.jpg

1016091100-01.jpg

  • 0
  • 0
shaved head1.jpg

shaved head1.jpg

  • 0
  • 0
Back
Top