1. U

    Ebay Worksman HD 26" alloy wheelset 11g stainless spokes front drum rear 3 speed

    For sale on the bay Set cost well over $400 from worksman Perfect motorized bicycle wheelset Worksman HD wheelset... not the steel rim and cheaper steel spokes front automotive style drum brake Rear shimano nexus 3 speed internal geared hub Aluminum alloy rims heavy duty dimpled rims 11g...
  2. Degoragon

    Sprockets Sprocket spacer for tapered axle?

    So I bought a freewheel rear wheel for my Schwinn project. I also have a 38T sprocket with CNC hub adapter. However, I have noticed that it is a tapered hub, and it it is 0.68" at the center, and 1" at the ends. Any way to shim up the difference?
  3. Degoragon

    Wheels Bought new 26" freewheel for bike. Sprocket Adapter will not fit. (too big)

    Well, My Kulana has been now one problem after another, including a recent incident that bent the rear wheel, sending it into the frame. I'm done with it for now. it's a bit small for me anyways. I'm taking the motor off, and placing it on another bike. Looking for a replacement, I went to...
  4. Glenng

    is the rear wheel supposed to move with good force when clutch is engaged

    Is the rear wheel supposed to move with good force when clutch is not pressed? when i push the bike with good force without pressing the clutch it moves forward an inch or two and makes a burping noise. Is this normal i think i remember the rear wheel being totally locked and unable to spin at...
  5. D

    For Sale HD Bike Wheel and Axle Kit $90

    I have an unused, never mounted, 150mm HD Wheel, the type with the mounted left side drive sprocket and disk brake mounts. I accidentally ordered 2, so my mistake is your gain. I did misplace the 180mm rotor, but if I find it I put it back in the box before shipping. Although an upgrade to a...
  6. Z

    Back wheel locked up

    Hi so I'm very new to working on engines and this seemed doable for me, putting everything together was a breeze but when starting up the bike the accelerator was at max and couldn't be turned down with the throttle so I turned the bike off with the kill switch and gave it another go, next thing...
  7. Rogue..

    68 spoke wheel?

    will the 9 bolt sprocket adaptor fit a 68 spoke wheel?
  8. L

    Question: Wheel Compatibility with Cruiser

    *Disclosure*- I am a motorized bike noob. I started on my 80cc kit a couple days ago. I am mounting the kit on a Huffy Cranbrook Cruiser ($80 at walmart. I originally wanted to build this as cheaply as possible.) I started by trying to put on the new sprocket but an overtightened nut gave me...