19mm Zeda Carb And Throttle cable???

[Sumsloppymeet]

Is there a certain size for this carbs throttle cable or should ones like this work well?

 

[Frankenstein]

Is there a certain size for this carbs throttle cable or should ones like this work well?

No not really and standards, unless it was a carb, throttle cable, and throttle set meant for a specific bike. These things are crap shots, however you can take some guesswork out of the game by getting a throttle that has a twist barrel with multiple holes for different length cables, at that point you'll have enough coarse and fine adjustment zones to match almost any carb and cable up except ones that are obviously too short.

Happy trails.

 

[butre]

if the cable is too short ie doesn't idle you can shorten the jacket around the cable. if it's too long and you can't adjust it out with the barrel nut you can cut off the fat end that goes in the grip and cast a new end around it

 

[Frankenstein]

They have these:

This let's you get just about anywhere.

 

[butre]

I'm not a throw money at it kind of guy, and definitely not a wait 6 months for it to come from guangzhou kind of guy

 

[Frankenstein]

I'm not a throw money at it kind of guy, and definitely not a wait 6 months for it to come from guangzhou kind of guy

Sometimes it's beneficial when you order a couple just cause you could use them later on, especially when it's only $15 for a complete assembly and they do ship from California as well as China.

 

[Sumsloppymeet]

this is what i picked up should be here by friday i grabbed the blue one now just waiting for my carb to ship

 

[Frankenstein]

That's a tight throttle too, about an eighth turn is wot on most carbs. Good one though and you can cut the end off if you like it shorter lol

 

[Frankenstein]

Oh and they went down in price, less than 9 dollars..
http://www.ebay.com/itm/311917907641

Not bad for what it is, the metal flange is screwed onto the barrel, in right hand thread which is counterintuitive to the rotation you'll be pulling on, if you can manage to unscrew it put a drop or 2 of red locktite on the threads and reassemble to prevent it coming out.

 

[Sumsloppymeet]

Dang These thing are sweet to their here and for 8$ and some change this things are worth the 7 day wait good quality for less than 10$