1st Time

[Sinfull]

 

[Sinfull]

Free bike and 150cc gy6

 

[Sinfull]

This is where I am at right now, it got too cold to be in the garage welding anything

 

[Sinfull]

Have to plate the rear legs, run a gusset so it won't bend, weld a tube to join the mounting for the single side shock and find a long enough bolt for the shock

 

[Sinfull]

Not the best picture, sorry it is way too cold to get proper pics. 50 degree drop in temp really put the brakes on the project. Mount in pics looks crooked, but I offset it get center of tire to center line of frame. Full weld on inside so it rock solid now. And line up with the frame. 12 inch rear shock to center of the rear mount will give me correct slight upward tilt of engine and roughly 4.5 inches of clearance from bottom of engine.

 

[Karl Snarl]

This is where I am at right now, it got too cold to be in the garage welding anything View attachment 163585

I was going to do the exact same thing one day, I plan on keeping the pedals though. lol yes!!!! I love it!!!

 

[Sinfull]

Was going to keep pedals but the bike came with a bad bearing, 1st pic with pedals hanging out so just scrapped the pedals.

 

[Sinfull]

 

[Sinfull]

1st idea was to plate and sleeve the crank bearing for the mount, but bottom tube was hitting my intake and no carb mount room, so the white 50cc seen in the back of the garage had to give up its mount for for carb clearance

 

[Sinfull]

This is where I am at