I have 2 sick bike parts shift kits, 2 4g(not knockoffs) transmissions and a bunch of parts including a bunch of sprockets, the kits are used but as anyone familiar with this gear knows they last forever. Wondering where to unload it all... I'm in central Florida. Not even sure what it's worth and not looking for a fortune just enough for it to be worth my time to box it all up... and ship it is someone wants it shipped. Would really like to sell it AL together... don't have space for bikes anymore
For Sale 2 4stroke sick bike part kits, 2 grubee 4g transmissions, bunch of parts
- Thread starter UtiliD
- Start date
Gordy
Well-Known Member
I'm sorry. I don't remember how old my friend is, but I know he's younger than that. He's had trouble eating and drinking too. He's just finished radiation and has I believe one or two chemo treatments left before he goes in for operation.
UtiliD
Member
Yeah they're getting the cure... good for them... I hope they kick it in the ass... tell them that even when they feel tired and beat up they have to fight to stay active/keep their strength up... and as miserable as it makes them they have to keep their intake of protien, fats, carbs up... and make sure they're getting electrolytes and staying hydrated. It will be rough and miserable often but it's the only way through.
UtiliD
Member
The 80t 4g transmission w 9t solid output cog. Never used because I didn't finish the build. It was on an unfinished nirve cruiser outside under a tarp and it's often 100% humidity here, that's the only reason its not sparkling new. The output cog may have spent a shirt time on the shifter I did finish but it wasn't long and in the parts there is another brand new 9t output cog. No freewheel in these 4g trannys. The shift kit this was paired with had the White industries HD freewheel(so it has no miles on it either. Pic coming
I have a total of 5 of the 5 hole freewheels(the ACS version has 10 holes though):
one ACS that's on the kit with the Dark gray power coated SBP mount
The White Industries heavy duty blue freewheel that has no miles on it
Another ACS that may have been on the 1st build for a short time
A Dicta that's never been used
And a low quality chrome Chinese one
I also have 5 or 6 13t-16t freewheels some will not take a chain smaller than a 410wide(standard BMX or internal geared hub chain) some will take a 410 narrow.
They seem to all be ACS except 2 an epoch 16t(not great quality)
One I ordered on ebay and although it's not been used(tested) the build quality impresses me period, but especially considering it was $20 I think & sealed bearing freewheels Ive seen are standard $80minimum, it's a 16t.
I have a total of 5 of the 5 hole freewheels(the ACS version has 10 holes though):
one ACS that's on the kit with the Dark gray power coated SBP mount
The White Industries heavy duty blue freewheel that has no miles on it
Another ACS that may have been on the 1st build for a short time
A Dicta that's never been used
And a low quality chrome Chinese one
I also have 5 or 6 13t-16t freewheels some will not take a chain smaller than a 410wide(standard BMX or internal geared hub chain) some will take a 410 narrow.
They seem to all be ACS except 2 an epoch 16t(not great quality)
One I ordered on ebay and although it's not been used(tested) the build quality impresses me period, but especially considering it was $20 I think & sealed bearing freewheels Ive seen are standard $80minimum, it's a 16t.
Attachments
UtiliD
Member
UtiliD
Member
I have a bunch of stuff I collected to make installing throttles easy/better looking, more functional, space saving or you want to keep all your cables/lines lined up right next to eachother... or you need a way to help your throttle cable avoid heat from the motor or exhaust.
3 complete Staton clutches with the perfect springs for these motors 49cc or 53cc... (2 of the 3 complete Staton clutches have 0 miles on them, 1 from the incomplete build[yellow shift kit))] one pictured with the additional clutch parts), extra Staton clutch springs(6 so 2 clutchs worth)... and 3 additional staton clutch platform/weight/frame... just need springs and shoe... and as I said 2 sets of Staton springs included.
Mass amounts of mounts / brackets / hardware could be for many things... exhaust mounts, chain guard mounts, mounts for a new custom shift kit, front and rear lights, gas tanks, and on and on
& Brand new throttle cables
3 complete Staton clutches with the perfect springs for these motors 49cc or 53cc... (2 of the 3 complete Staton clutches have 0 miles on them, 1 from the incomplete build[yellow shift kit))] one pictured with the additional clutch parts), extra Staton clutch springs(6 so 2 clutchs worth)... and 3 additional staton clutch platform/weight/frame... just need springs and shoe... and as I said 2 sets of Staton springs included.
Mass amounts of mounts / brackets / hardware could be for many things... exhaust mounts, chain guard mounts, mounts for a new custom shift kit, front and rear lights, gas tanks, and on and on
& Brand new throttle cables
Attachments
UtiliD
Member
Is everyone able to view these images full size & zoom in? because I just saw I had to choose to post the pictures as full size images on the other forum/site.
UtiliD
Member
This is the 4 g 100t just wanted to post it like I did the 80t
The SBP mount you can see I added a flange to mount a tensioner on... I was not a fan of the threaded rod up & down tension process but I did use it for the other mount and it worked fine.
UtiliD
Member
A bunch of different types of cable guides, some were not cheap, some are makeshift. And a bunch of different chain tugs/tensioners
And mounts from a different angle...
more mounts to be pictured shortly...
UtiliD
Member
Regular 4 stroke engine kit mounts
Just held together with a few bolts. Was thinking about a 10g like setup for a long frame bike you'll see other parts of that concept I had in the next pictures
UtiliD
Member
15mm ID pillow block bearings
Clutch housings including 1 from Staton- dual bearing 1/2" keyed shaft($60 or $70) on their site now
Aluminum T belt cogs w 2 setscrews:
-20t 15mm wide 15mm ID for shaft
-15t 15mm -16mm wide 1/2inch ID for shaft
15t 20mm wide 12mm ID for shaft(was thinking about boring/drilling it to 1/2inch)
Connector for shafts 15mm ID 2 grubee shafts