Clutch 2-stroke, 3hp Briggs- Clutch wanted

[Nashville Geoff]

--------------------------------------------------------------------------------

I'm building a motorized bike, using a motor from a snow blower. I'm wanting to find a pulley or belt clutch to fit it. The engine is a model 62032, and the shaft is about 17mm, stepped down to about 16mm where the woodruff key is. Where can I find such an animal? Thanks, Nashville Geoff

 

[MotorbikeMike]

Metric confusion

Hello Geoff, I'm gonna bet you, that if you "convert" your 16mm to US, is is going to be 5/8 inch! Now......5/8 is COMMON US size for autto-clutch, pulley, and sprocket, so, go out, shop, and have fun!

Mike

 

[ocscully]

Max Torque offers a pulley clutch http://www.maxtorque.com/html/pully_clutch.html I bought one of their Htd Metric Timing Belt clutches and have been very happey with it, and the people at Max Torque were great to do bu[siness with

ocscully

 

[SimpleSimon]

NG, if you can find a B&S model number on that engine I'd very much like to know what it is.

 

[ibdennyak]

NG, if you can find a B&S model number on that engine I'd very much like to know what it is.

Sounds almost like a HSK 600, but that is a Tecumseh with about 98 cc's. Also has a 5/8 shaft.

Denny

 

[Nashville Geoff]

Model Type Code
62032 0631-01 83061413

 

[graucho]

http://www.bmikarts.com/1-sprockets-chain-clutches-torque-converters.shtml
http://gokartsusa.com/selectacentrifugalclutch.aspx
http://www.gokartsupply.com/clutches.htm
http://www.heeters.com/kartclutches.shtml
http://www.hoffcocomet.com/comet/aftermarket-centrifugal-clutches.asp
http://tewarehouse.com/80-3
http://smallengineadvisor.com/starters/80-3.html
http://www.mfgsupply.com/GoMiniClutchComet.html
http://www.alliedleisurecorp.com/index.asp?PageAction=VIEWPROD&ProdID=160
http://www.jsesc.com/Information/Products/Clutch/ClutchApplication.aspx
http://www.milfordpower.com/R456_35_Chain_5_8_Bore_Max_Torque_Clutch_p/r456.htm
http://www.gokartgalaxy.com/clutches_keys.htm
http://www.smallenginebusiness.com/mowerzone/prods/7-06001.html

 

[Nashville Geoff]

Thanks for the links. I found a pulley clutch that would work from TEW, & I'm talking to Max-Torque about possibly one of their timing belt pulley clutch applications.