2 wire kill switch is missing the metal cap that is used to plug into the CDI

[NukeSnicks]

should I be concerned about this?

 

[Chainlube]

Ya, you need a new bullet connector for there, do you know how to solder?

 

[NukeSnicks]

Yeah, I do.

 

[Chainlube]

I've had to solder so many of those connectors. There's a nice place in England that sells every kind of connector, and at the time I was restoring my Spitfire and needed the British style bullets so I bought enough of those and a couple bags of the smaller ones, male and female for "just in case". I'm needing to order some more now.

 

[NukeSnicks]

I've had to solder so many of those connectors. There's a nice place in England that sells every kind of connector, and at the time I was restoring my Spitfire and needed the British style bullets so I bought enough of those and a couple bags of the smaller ones, male and female for "just in case". I'm needing to order some more now.

I actually found the piece it was on the ground in the living room . So all I have to do now is solder it back on.

 

[Meterman]

Hello go to a electrical supply house / hardware store and you could do butt splices and crimp them together good luck.

 

[NukeSnicks]

Hello go to a electrical supply house / hardware store and you could do butt splices and crimp them together good luck.

Thanks

 

[Meterman]

No problem let me know if it works for you

 

[NukeSnicks]

No problem let me know if it works for you

Alright