3d printed velocity stack coordinates (blue print)

[Wevil Knievel]

I know that 3D printing is relatively new but I have seen several people out there that have had velocity Stacks that they had printed up with their 3D printers. Does anybody have the vectors for this or should I keep searching?

I found one on line but its weird looking and looks nothing like what I'm used to seeing for that part.

If anybody can help point me in the right direction I would be greatly appreciative.

What is pictured below is what I am looking for.

If I find them I will come back and post them here to share them with everyone.

 

[Cozmik Mezzenger]

If you give us the carb you are connecting it to, that would be helpful sir.

 

[Cozmik Mezzenger]

If you give us the carb you are connecting it to, that would be helpful sir.

Search Thingiverse - Thingiverse

Download files and build them with your 3D printer, laser cutter, or CNC.

www.thingiverse.com

3D model community. Search & download free 3D models. Share 3D models

Found 16K+ results for “velocity stack” across many websites

thangs.com

You should be able to find what you are looking for on one of these pages.

 

[Wevil Knievel]

Oh sorry its a stock nt carb.

If you give us the carb you are connecting it to, that would be helpful sir.

 

[Wevil Knievel]

Search Thingiverse - Thingiverse

Download files and build them with your 3D printer, laser cutter, or CNC.

www.thingiverse.com

3D model community. Search & download free 3D models. Share 3D models

Found 16K+ results for “velocity stack” across many websites

thangs.com

You should be able to find what you are looking for on one of these pages.

Unfortunately they have everything but one for an nt carb. But thank you all the same. You rock bro!

 

[Cozmik Mezzenger]

Check out these pages.

"nt velocity stack" 3D Models to Print - yeggi

10000+ "nt velocity stack" printable 3D Models. Every Day new 3D Models from all over the World. Click to find the best Results for nt velocity stack Models for your 3D Printer.

www.yeggi.com

1 search results for 3D models to 3D print with the keyword(s) “nt carb velocity stack”・Cults

Here are the results for your search of 3D models for 3D printer and 3D designers: nt carb velocity stack. If you cannot find your happiness, please ask Cults for an on-demand 3D modeling for 3D printing.

cults3d.com

velocity stack

l➤ velocity stack 3d models ✅. i made this velocity stack to go over a novi 2200 supercharger or any opening with a 5" opening. i made it to slip over a turbo gaurd and dimpling to flow better. ...feel free to remix this

www.stlfinder.com

 

[Wrench]

A velocity stack can also be made out of a plastic water/soda bottles,
Different size dia, length & shape water bottles makes for different size velocity stacks
Experiment until ya find the one that works best, Then 3D print it or just use it as it, It's free

 

[Wevil Knievel]

I had a friend print me out one I foud on an stl file web page it looks like the metal one but with a throat that matches the opening on the carb and it kicks a**!!!

I put my bike on a stand and a piece of cardboard over the back tire area so it's to block the wind and took a big puff off of a cigar and blew it towards the carburetor and you could see the vortices sucking in the smoke it was causing a definite swirl.

A definite increase in mid and higher range throttle +4-6 mph in speed.

With a size 68 carb re-jet, the flex tailpipe, the oversized high compression aluminum cooling head, ngk plug and velocity stack my bike runs better than it ever has. If you have a 3D printer it is definitely worth checking out. If anybody wants the web address I can get it.

 

[Wevil Knievel]

I found mine elsewhere but yes I Googled it again and the one that you had mentioned popped up that wasn't there when I first made an inquiry someone has added it but here it is.

Velocity Stack Motorized Bicycle Bike NT Carburetor Carb 66cc 80cc by ThisWorksIGuess

This is a velocity stack to replace the airbox on the stock NT carburetor on 66/88cc bicycle motors. I made improvements on the aluminum design available by extending the stack down to the hole so there is no gap. (Note: You will have to remove your choke for this part. I didn't experience any...

www.thingiverse.com

Check out these pages.

"nt velocity stack" 3D Models to Print - yeggi

10000+ "nt velocity stack" printable 3D Models. Every Day new 3D Models from all over the World. Click to find the best Results for nt velocity stack Models for your 3D Printer.

www.yeggi.com

1 search results for 3D models to 3D print with the keyword(s) “nt carb velocity stack”・Cults

Here are the results for your search of 3D models for 3D printer and 3D designers: nt carb velocity stack. If you cannot find your happiness, please ask Cults for an on-demand 3D modeling for 3D printing.

cults3d.com

velocity stack

l➤ velocity stack 3d models ✅. i made this velocity stack to go over a novi 2200 supercharger or any opening with a 5" opening. i made it to slip over a turbo gaurd and dimpling to flow better. ...feel free to remix this

www.stlfinder.com

 

[GW's Motorized]

@Jayraye39 made one. Maybe he has some advice.