44 tooth "B" style sprocket- 5/8" shaft ?

[DetonatorTuning]

any one know if there is such an animal or where to find them if there are ?

or a 44 tooth sprocket that has a carrier that will go on 5/8" shaft ?

thanks,
steve

 

[cgbjake]

I usually get my stuff at Mcmastercarr.com.

 

[5-7HEAVEN]

www.staton-inc.com

David has a bunch of sprockets. Some sell for $1.00

 

[kerf]

DT,
Did you ever find that sprocket, if not check out Martin.

http://www.martinsprocket.com/homeX.htm

 

[Large Filipino]

I'm thinking you're working on a Trike or similar to need this sprocket to fit on your axle/jack shaft?

I looked into the Grainger site. Search the part numbers in the pics below. I may be wrong but that bushing is supposed to bolt on to that sprocket. Al least according to the sprocket it needs that bushing for a 5/8 yes I only see two holes too. Then you'll need a #40 chain. And it's a 45 tooth.

Oh. And that sprocket is expensive.
But with a drill maybe if you get two of those 8 dollar bushings and sandwich a 44 tooth bicycle sprocket in between,line it up straight and drill the holes it may come out for you.

 

[DetonatorTuning]

thanks for all the replies and links guys, i'm just looking for alternatives, i hope not to need them.

steve