47mm steel sleeve cylinder ring help



Street Ryderz

Well-Known Member
Joined
Oct 14, 2016
Messages
2,837

Frogslayer

Active Member
Joined
Jan 20, 2019
Messages
207
I think dennis kirk used to have a section of rings by size pretty much for custom bores but would probably have what your looking for. Would the factor rings not work well in a steel lined cylinder?
 

Spare_Parts

Well-Known Member
Joined
Nov 29, 2017
Messages
886
I think dennis kirk used to have a section of rings by size pretty much for custom bores but would probably have what your looking for. Would the factor rings not work well in a steel lined cylinder?
Needs chrome or moly rings to my understanding.
 

Will'smotobikes19

Well-Known Member
Joined
Apr 9, 2018
Messages
1,021
Mz Miami uses thin cast iron rings for the 48mm btw they’re a b*tch to compress over the thick stock ones. You might find some special ones for dirt bike motors a lot have 47mm pistons.
 

CrazyDan

Well-Known Member
Joined
Jul 9, 2016
Messages
1,465
From what I understand is you just don't want the cylinder lining and rings to be of the same material.
 

HumanPerson

Active Member
Joined
Mar 4, 2017
Messages
541
When you find out what type and where we can get the rings, please send me a msg. .

I've got a sleeved cylinder from BGF just have not had the time to ask them for rings or the info on which rings to use.

Thanks and Ride Safe!

HP
 
Top