48 Whizzer "H" motor-No Spark

Discussion in 'Whizzer Motorized Bicycles' started by jaxflhx, Aug 13, 2011.

  1. jaxflhx

    jaxflhx New Member

    Hi, I'm new to motorbikes.com. I have a 1948 Whizzer "H" motor on a 1953 Schwinn bicycle. It was running great. I removed the motor and painted the bike, now I can't get a spark. I have checked the air gap on the mag and it is 12 thousandths. It has an electronic module instead of points and condensor. Anyone have any ideas. It was running fine when I removed it, after painting bike, when I replaced it, no spark. Thanks Jax

  2. mason_man

    mason_man Active Member

    Check your plug,gap should be .023 to .025 inch or try a known good plug. Ray